ezDISPLAY Mini DESCRIPTION
Your design requires an all-in-one user interface with a display and user
input capabilities. Requirements are: small, portable, able to display
graphics along with text, viewable in the dark, can't use a lot of I/O pins,
and have lots of features but quick to implement and simple to use.
The ezDISPLAY Mini is a perfect fit for your design.
The ezDISPLAY Mini is a serial command controlled LCD module with an
integral touchscreen. The LCD has a resolution of 128 by 64 pixels and
can display both graphics and text. The touchscreen is a resistive type
screen such as the types used on PDAs and the like. This allows the ezDISPLAY Mini to track the position of the
touchscreen down to the pixel. The integral controller breaks down the complex decoding operation of the touchscreen and
returns a simple X and Y position. The LCD is also provided with an LED backlight that can be turned on and off with a
simple command.
The ezDISPLAY Mini comes with two font sets, 8x8 and 6x8. A complete built-in ASCII character set and space to create 32
user-defined characters is provided in each font set. All user-defined characters are stored in non-volatile memory so they
are not lost when power is removed. Memory is also provided to store up to 4 screens that can be re-loaded at any time.
Again, these saved screens are stored in non-volatile memory. Characters and graphics can be inter-mixed on the screen
and characters can be placed in landscape or portrait along with other options. The ezDISPLAY Mini even has a command
that allows downloads of screens from other sources such as those drawn on a computer.
The ezDISPLAY Mini comes with a floating character that makes a great companion to the touchscreen. The floating
character can be displayed and moved around anywhere on the screen without destroying any of the image on the LCD.
This adds another level of character display to the ezDISPLAY Mini. The floating character can either be controlled by the
end-use controller or it can be “latched” to the touchscreen so it automatically follows the movement of the user stylus or
finger.
Communications to and from the ezDISPLAY Mini are done through the TTL level asynchronous serial lines. The
communication baud rate is set by the user through the ezDISPLAY Mini auto baud rate detection feature. The baud rate
can be in the range of 300 to 115.2K.
The ezDISPLAY Mini comes with four mounting holes for secure placement. A 4-pin header is used to supply power and
access the serial communication lines.
Your design requires an all-in-one user interface with a display and user
input capabilities. Requirements are: small, portable, able to display
graphics along with text, viewable in the dark, can't use a lot of I/O pins,
and have lots of features but quick to implement and simple to use.
The ezDISPLAY Mini is a perfect fit for your design.
The ezDISPLAY Mini is a serial command controlled LCD module with an
integral touchscreen. The LCD has a resolution of 128 by 64 pixels and
can display both graphics and text. The touchscreen is a resistive type
screen such as the types used on PDAs and the like. This allows the ezDISPLAY Mini to track the position of the
touchscreen down to the pixel. The integral controller breaks down the complex decoding operation of the touchscreen and
returns a simple X and Y position. The LCD is also provided with an LED backlight that can be turned on and off with a
simple command.
The ezDISPLAY Mini comes with two font sets, 8x8 and 6x8. A complete built-in ASCII character set and space to create 32
user-defined characters is provided in each font set. All user-defined characters are stored in non-volatile memory so they
are not lost when power is removed. Memory is also provided to store up to 4 screens that can be re-loaded at any time.
Again, these saved screens are stored in non-volatile memory. Characters and graphics can be inter-mixed on the screen
and characters can be placed in landscape or portrait along with other options. The ezDISPLAY Mini even has a command
that allows downloads of screens from other sources such as those drawn on a computer.
The ezDISPLAY Mini comes with a floating character that makes a great companion to the touchscreen. The floating
character can be displayed and moved around anywhere on the screen without destroying any of the image on the LCD.
This adds another level of character display to the ezDISPLAY Mini. The floating character can either be controlled by the
end-use controller or it can be “latched” to the touchscreen so it automatically follows the movement of the user stylus or
finger.
Communications to and from the ezDISPLAY Mini are done through the TTL level asynchronous serial lines. The
communication baud rate is set by the user through the ezDISPLAY Mini auto baud rate detection feature. The baud rate
can be in the range of 300 to 115.2K.
The ezDISPLAY Mini comes with four mounting holes for secure placement. A 4-pin header is used to supply power and
access the serial communication lines.
|
 |
 |
 |
 |
 |
 |
 |
ezDISPLAY Mini
● Auto baud rate detection serial lines (300 -
115.2K)
● 128 by 64 Screen resolution (LED backlight)
● Integral touchscreen
● Four screen page memory
● Floating character for user feedback
● 8x8 and 6x8 Fonts with built-in ASCII
characters and user-definable characters
● Auto baud rate detection serial lines (300 -
115.2K)
● 128 by 64 Screen resolution (LED backlight)
● Integral touchscreen
● Four screen page memory
● Floating character for user feedback
● 8x8 and 6x8 Fonts with built-in ASCII
characters and user-definable characters
|
ezDISPLAY Mini: $79.95
Comes with:
Product Resource CD
Comes with:
Product Resource CD
The price listed above is for 1 to 9
pieces. For prices on quantities of 10
or higher you can request a quote.
pieces. For prices on quantities of 10
or higher you can request a quote.
ezDISPLAY Mini SCREEN SHOTS
ezDISPLAY Mini DATA SHEETS AND OTHER DOCUMENTS
|
|
ezDISPLAY Mini APPLICATION NOTES
|
|
ezDISPLAY Mini SOURCE CODE AND SOFTWARE
|
|
